language

Products

——

Home page

KML 910

Classification:

Slip Masterbatch

Casting

Blowing Film

Product Introduction

KML 910 is a high-efficiency smooth masterbatch for CPE casting/blowing film. By adding a small amount of KML 910, the film can be endowed with excellent high smoothness and low addition amount. It is generally used at the same time as anti-blocking masterbatch or resin containing anti-blocking components.

Message

Product Details

● Product description

● Physical properties

Melt index (190 ℃/2.16kg)	g/10min	21
Bulk density	kg/m³	580
Moisture content	ppm	<1500
active ingredient content	%	10

The above is only typical data, not as a standard at the time of sale.

● Application

KML 910 is widely used in gravure printing film, food packaging film, multi-layer co-extrusion film, high light transmission film, etc. KML 910 a lower coefficient of film friction can be obtained by adding a small amount of 1% to 2% master batch.

● Method of use

The amount of the masterbatch is determined according to the customer's specific requirements for the coefficient of friction of the film. The addition amount of KML 910 is controlled at 1% ~ 3%.

Use according to the normal addition ratio, which has a slight effect on corona treatment, heat sealing and adhesive properties. However, if used in combination with other migratory additives, such as antistatic agents or ultraviolet light stabilizers, special care is required.

● Food approval

KML 910 can be applied to food packaging FDA unlimited according to the following requirements

● Packaging & Storage

KML 910 are packed in polyethylene bags of 25kg each, and the whole is covered with shrink film and carried on pallets. For optimum performance, the storage period should preferably not exceed 6 months at a temperature of 25°C.

Keywords:

More products