Products
——
KML PPA K5
Classification:
Product Introduction
Product Details
● Product description
KML PPA K5 is a processing masterbatch for PE extrusion, injection molding and film blowing. By adding PPA processing aid masterbatch, the processing performance of PE products can be improved without affecting other properties of the film.
The addition of the masterbatch can prevent melt fracture, remove water lines, improve product smoothness and brightness, reduce or eliminate head precipitates, and extend continuous production time; reduce film crystal points and fish eyes; reduce torque, increase production, and reduce unit energy consumption.
● Physical properties
| Melt index (190 ℃/2.16kg) | g/10min | 7 |
| Bulk density | kg/m3 | 530 |
| Moisture content | ppm | <1500 |
| active ingredient content | % | 5 |
The above is only typical data, not as a standard at the time of sale.
● Method of use
The processing temperature of the resin added with KML PPA K5 should be controlled below 240 ℃.
The initial use of the equipment requires 10 to 60 minutes of onset time, can also increase the amount of masterbatch to shorten the onset time, in order to shorten the onset time is recommended to use the initial addition amount of 5.0, the normal addition amount is generally controlled at 1.0.
● Food approval
KML PPA K5 can be applied to food packaging according to the following requirements
FDA No Restrictions
● Packaging & Storage
KML PPA K5 is packed in polyethylene bags of 25kg each, covered with shrink film and carried on pallets. For better performance, the storage period should not exceed 12 months at a temperature of 25°C.
Keywords:
Processing Aid
Message feedback
If you are interested in our products
You can call the service hotline directly +86-393-4405588
Pioneering and Innovative, Pragmatic and Effective
Comaler plastics, dedicated to the majority of customer service
Address: East of Xindong Road and Weidu Road, Hualong District, Puyang City, Henan Province
E-mail: Km@Comaler.com
