language

Products

——

Home page

KML PP05

Classification:

Antiblock Masterbatch

Casting

Blowing Film

Product Introduction

KML PP05 is an anti-adhesion masterbatch containing synthetic silica with homopolypropylene as the carrier. After adding the anti-adhesion masterbatch, the film can be prevented from sticking during winding, and the sliding and antistatic properties of the film containing additives can be adjusted to make the film roll smoother during unwinding and slitting.

Message

Product Details

● Product description

● Physical properties

Melt index (190 ℃/2.16kg)	g/10min	6
Bulk density	kg/m3	530
Moisture content	ppm	<1500
active ingredient content	%	5

The above is only typical data, not as a standard at the time of sale.

● Method of use

KML PP05 has excellent dispersion and good transparency.

KML PP05 open masterbatch usually only needs to be added to the surface layer, and the recommended addition amount is 2.0~3.0. KML PP05 is especially suitable for light film, which can reduce the loss of rigidity.

● Food approval

KML PP05 can be applied to food packaging according to the following requirements

FDA No Restrictions

●Packaging & Storage

KML PP05 is packed in polyethylene bags of 25kg each, covered with shrink film and carried on pallets. For optimum performance, the storage period should preferably not exceed 12 months at a temperature of 25°C.

Keywords:

More products